DECOLA glass and ceramic liner sets

Raised lines, dots and outlines

These water-based acrylic liners let you draw raised lines, dots and ornaments on decorative glass and ceramics. Apply directly from the pointed tube, adjusting the line width with the pressure of your hand. Use the liners on their own or for outlines with DECOLA glass and ceramic paints and stained-glass paints.

Choose your colours

• Classic, 3 × 18 ml: black (810), white (104) and grey (814).
• Coloured, 4 × 18 ml: yellow (211), red (331), navy blue (515) and green (725).

You receive one chosen set in a cardboard box. The classic set contains 54 ml in total; the coloured set 72 ml. Choose the three neutral shades for contrasting outlines or the four colours for coloured details. Choose glass paint for filling larger areas separately.

Applying and drying

Thoroughly degrease the smooth surface. Draw lines with steady pressure and make dots with short presses. Allow the outlines to dry for 3 hours before filling the areas with glass and ceramic paint. You can also add liner details to an already painted motif. Leave the finished decoration to dry for 3 days.

For greater durability, a fully dried, heat-resistant object can be warmed in an oven for 30 minutes at up to 100 °C. Check that the object and any other paint used suit this treatment. Rinse the applicator tip with water after use and close the tubes tightly.

Try different line widths

On a spare piece of the same material, draw two short lines using different pressures and add a row of dots. Note which pressure gives the width you want and inspect the relief after drying. Then try a small enclosed area with compatible glass paint before making a larger motif.

Safe use

Wash the dried decoration gently with warm water, without abrasion or hard rubbing. Do not use the liners on objects that come into contact with food. Follow the pack instructions and wash any paint off skin with water.

Explore glass and porcelain paints