Divolo Dammar varnish spray for oil and acrylic, 400 ml

Give a thoroughly dry oil or acrylic painting a protective final coating with Divolo Dammar varnish spray. The ready-to-use varnish helps even out the sheen and protects against dust and dirt. You receive one 400 ml can.

Choose gloss or matt

Choose gloss for a clear, shiny finish or matt to reduce reflection. Both are final picture varnishes, not painting mediums or temporary retouching varnishes. Assess sheen and colour after drying on a sample with the same paint first. Do not use on cups, tableware or other food-contact surfaces.

Short passes over a flat painting

Remove dust and ensure that the paint is fully dry at the surface and throughout. Work outdoors in dry conditions and lay the painting flat to limit drips. Shake the can well and frequently between sprays. Spray from 20 to 30 cm in short passes from left to right. Let the first coat dry before applying a second.

Drying and nozzle care

At 20 °C, allow approximately 15 minutes to become dust-dry, 1 hour touch-dry and 12 hours to dry fully; layer thickness and conditions affect these times. After use, invert the can and spray briefly until only gas comes out to help prevent clogging. Replace the cap afterwards. Do not add thinner to the aerosol can.

Safe use

Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking.

Avoid spray mist and wear protective gloves and eye protection. Keep away from heat, hot surfaces, sparks and open flames; no smoking and do not spray on an ignition source. Do not pierce or burn, even after use. Protect from sunlight and temperatures above 50 °C. Keep out of reach of children. If in eyes, rinse cautiously with water for several minutes, remove contact lenses if possible and continue rinsing. Dispose of residues and the can according to local regulations.

Explore painting mediums and varnishes