Pébéo UV Protect satin varnish spray, 200 ml

Pébéo UV Protect gives dry paintings and illustrations a transparent, non-yellowing satin coating and helps reduce the effects of UV light on colours. This solvent-based varnish is ready to use. You receive one 200 ml aerosol can.

For paintings and Colorex illustrations

Use on dry oil and acrylic paint, gouache, watercolour, ink and pastel. The satin finish adds a gentle sheen and can change how colours look, so assess a sample with the same materials first. For illustrations made with water-dilutable Colorex ink, this coating helps preserve colour intensity when exposed to light.

Apply thin coats and clear the nozzle

Let the colours dry before varnishing. Shake well and spray from 20 to 30 cm in several thin coats. Allow approximately 10 to 15 minutes for the varnish to dry; thickness and conditions affect the result. After use, clear the nozzle by holding the can upside down and spraying briefly. Do not add water or thinner.

Safe use

Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.

Contains BIS(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL) SEBACATE, HYDROXYPHENYL-BENZOTRIAZOLE DERIVATIVES, METHYL 1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL SEBACATE. May produce an allergic reaction.

Use only outdoors or in a well-ventilated area, do not breathe spray mist and wear protective gloves and eye protection. Keep away from heat, hot surfaces, sparks and open flames; no smoking or spraying on an ignition source. Do not pierce or burn, even after use. Protect from sunlight and temperatures above 50 °C. Store locked up and out of reach of children. If in eyes, rinse with clean water for 15 minutes and seek medical advice if irritation persists. Prevent release of residues into the environment and dispose of the can according to local regulations.

Explore painting mediums and varnishes