Pébéo Setacolor 3D gloss fabric liner 20 ml

One tube for glossy raised detail

Add raised lines, dots and small accents to fabric with this water-based Setacolor 3D liner. You receive one 20 ml tube with a dispensing nozzle, in Black 32 or Spicy Red 45. Both colours have a gloss finish. This is dimensional paint, rather than a flat fabric marker. Fabric and separate tools are not included.

Drawing with the nozzle

Work on prewashed fabric, such as cotton, linen, polyester or mixed fibres. Put a protective layer between garment layers and test on a spare piece. Adjust pressure and movement to draw a fine or thicker line with the nozzle. A brush, palette knife or sponge offers other ways to apply the paint. Check the fabric care label when choosing your project.

Try lines and dots

As a suggested trial, make two short borders on a suitable fabric scrap: one continuous line and one row of separate dots. Keep colour and length the same, record pressure and dot spacing and compare the dry relief. Follow the drying and washing intervals before washing the sample. This is a proposed design trial, not a report of our own tests.

Drying and care

This Setacolor 3D liner needs no heat fixing. Allow 12 hours to dry, longer when humidity exceeds 80%. Wait 72 hours after application before washing the fabric. Wash inside out on a short cycle up to 40°C, without fabric softener, and air-dry. Iron only on the reverse.

Safe use

Contains CMIT/MIT. May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects. Protect from frost and heat. Dispose of contents and container according to local regulations.

Explore fabric paints and related materials