Pébéo Setacolor 7A light fabric marker, 1 mm brush tip

Write a name on a light cotton bag or draw fine leaves, borders and small lettering on suitable fabric. Pébéo Setacolor 7A for light fabrics combines a 1 mm brush tip with water-based paint. You receive one marker in your selected colour. Fabric and other materials are needed separately.

Choose a colour for your design

• Standard colours: Yellow, Orange, Red, Violet, Light blue, Green, Brown, Grey, Black.
• Fluorescent colours: Fluorescent yellow, Fluorescent violet, Fluorescent blue, Fluorescent green.

Choose black or grey for clear outlines, a standard colour for your drawing or a fluorescent colour for a bright accent. This version is designed for light fabrics. For opaque designs on dark fabric, choose the 7A Opaque range.

Prepare and draw

Cotton is recommended. Prewash the fabric according to its care label and let it dry. Check that it can tolerate the cotton iron setting needed for fixing. Shake the marker, then press the tip on a test surface for a few seconds until the colour flows. Practise lettering and lines on a scrap of the same fabric and assess the result once dry.

Heat-set and wash

Air-dry your design for 2 hours. Then iron from the reverse for 5 minutes on the cotton setting, without steam. Wait 48 hours after fixing before hand or machine washing at up to 40 °C, within the fabric’s care instructions. Dry cleaning is not recommended. Store the marker flat, protected from frost and heat.

Explore fabric paints