Pébéo Vitrea 160 glossy outliner set, 10 × 20 ml

Create raised outlines, dots and accents on glass with these water-based Vitrea 160 relief paints. The nozzle tubes are designed for drawing lines directly and defining areas of colour. This set contains ten 20 ml tubes, 200 ml in total; these are not markers or jars of liquid paint.

Ten colours with dispensing nozzles

The colours are sun yellow, paprika, pepper red, turquoise, lazuli, emerald, ink black, pearl, gold and pewter. Combine coloured outlines with pearl and metallic effects. The finish is glossy; the effect colours do not give the same see-through result as a transparent colour wash. You can use the outliners together with other Vitrea 160 colours.

Lines, dots and defined colour areas

Degrease the glass with alcohol or soapy water and let the surface become clean and dry. Try the paint first on a separate piece of suitable glass. Apply light pressure and move the nozzle steadily: pressure and speed together control how much paint forms the line. Keep a wet design flat to avoid touching it. The tubes make lines and accents; choose a separate Vitrea 160 glass paint for broad colour areas.

Make a small trial with three lines: slowly with light pressure, slightly faster with the same pressure, and a third line with a little more pressure. Add three dots beside them and record which combination gives the relief you want. Compare the dry result in side lighting before decorating a whole glass. This is a way to choose your application, not a promise of a fixed line width or yield.

Drying and curing

For decorative use without an oven, allow 72 hours to dry and then wash gently without soaking. This is not the same curing process as baking for dishwasher resistance.

For dishwasher resistance, dry for at least 24 hours and place the object in a cold domestic oven. Let the temperature reach 160 °C, then bake for 40 minutes at that stabilised temperature. Afterwards open the oven and let the object cool inside to limit thermal shock. Check beforehand that the object can withstand this treatment. Do not use Pyrex, Arcopal or equivalent surfaces.

Safe decoration and storage

Decorate only areas that will not contact food. Keep decoration on the outside of a drinking glass, at least approximately 1 cm below the drinking rim. Do not paint eating or cutting surfaces; baking does not change that restriction.

Contains BIT and CMIT/MIT; may produce an allergic reaction. Keep out of reach of children. Close tubes after use and protect the paint from frost. Glassware and other tools are not included.

Explore glass paints and complementary Vitrea 160 materials.